Press archive detail

WET engine: MTU Aero Engines develops drive of the future with wet combustion  

• Gas turbine-based concept significantly reduces impact on the climate
• Operation with SAFs and hydrogen in all thrust categories possible 

Berlin, June 23, 2022 – Through its Clean Air Engine (Claire) technology agenda, MTU is hard at work on reducing the climate impact and energy use of aviation propulsion systems in three stages. Zero emissions is the big goal. The company is focusing its efforts on the evolution of the gas turbine on the basis of the Geared Turbofan (GTF) and on revolutionary concepts. The favored revolutionary concepts include the Flying Fuel Cell and the Water-Enhanced Turbofan, or WET Engine. “This GTF-based engine will significantly reduce CO₂ and NOx emissions as well as formation of contrails,” says MTU COO Lars Wagner.

“Since the concept is based on the gas turbine, the WET engine can rely in full on MTU’s expertise,” explains Dr. Stefan Weber, Senior Vice President Engineering and Technology at MTU in Munich. The WET engine uses residual heat from the engine’s exhaust gas. To do this, a steam generator is used to evaporate water and inject it into the combustion chamber. This kind of “wet” combustion increases the engine’s efficiency, but that isn’t all. It also reduces nitrogen oxide emissions massively. The water needed for this is collected from the exhaust gas inside a condenser connected to a water separator. Fuel consumption, CO₂ emissions, and formation of contrails are also sharply reduced.

Weber continues: “The WET Engine can be operated with jet fuel, sustainable aviation fuels (SAFs), and hydrogen, and it can be used in short-, medium-, and long-haul flights. That means it covers the range where almost all of the aviation sector’s climate impact is generated.” By reducing climate impact by about 80 percent, this concept will achieve near climate neutrality as early as 2035. “It is also highly efficient, so it cuts costs and conserves valuable resources.”

In addition to the planned market launch in 2035, the Water-Enhanced Turbofan is to undergo further optimization between now and 2050. Near drop-in fuels – SAFs with chemical adjustments – can be used to achieve maximum reductions in climate impact. The adjustments needed, if any, will be minor. “If the WET Engine was operated with hydrogen, it would not only have further advantages in terms of climate-related emissions, but would also potentially reduce the engine’s weight and air resistance thanks to more-compact design and construction, as the heat exchangers needed for the concept can utilize the full cooling potential of cryogenic hydrogen,” explains Dr. Claus Riegler, Senior Vice President Technology & Engineering Advanced Programs at Germany’s leading engine manufacturer in Munich.